|
BB-ESFWBU2SATA525QAR6
e-SATA,
FireWire800 (IEEE 1394b) & USB 2.0 to SATA II RAID 6 Subsystem |
||||

200 mm (W) x 292 mm (D) x 186 mm (H)
|
||||
INTRODUCTION
ESFWBU2SATA525QAR6 is most
cost-effective SATA II disk drive RAID subsystem with completely integrated high
performance and data protection capabilities. ESFWBU2SATA525QAR6 takes full
advantage of high-speed 1394/USB serial bus and Serial ATA Bus allowing for
multi-user and multitasking performance. ESFWBU2SATA525QA-R6 delivers the
performance required for servers and I/O demanding applications such as
Video-On-Demand, database servers, workstations, high-end desktops, and image
systems. ESFWBU2SATA525QA-R6 allows two HDD failure
without impact on the existing data and failed drive rebuild is transparent to
the host. Environmental information is accessible either via the control
panel/serial port or Ethernet port.
|
Feature: |
|||
|
|
New OXFW924 IEEE1394b to SATA & TI IEEE1394b Chipsets | ||
|
|
Compliant IEEE 1394b-2002 and compatible with proposal 1394a-2000 | ||
|
|
Implements SBP3/SBP2 stack to optimize the performance (SBP-3 faststart support) | ||
|
|
Integrated internal ARM7TDMI 32-bit CPU with embedded SRAM | ||
|
|
TWO 9pin Connectors (For 1394b connection), e-SATA, USB2.0 | ||
|
|
Fully Supports SATA HDD Device Interface | ||
|
|
Fit 3.5" form factor
FIVE
SATA hard drives for RAID 6 Function: Seagate, Maxtor, IBM (Hitachi), Western Digital, etc Hard Drive, Complies with T13's ATA/ATAPI-7 d1532r2, vol. 1 & 2 Specification: Fully Supports 48-bit addressing for large hard drives (>128GB) Seagate 400GB, Hitachi 500GB, Western Digital 400GB, Maxtor 300GB HDD Supported |
||
|
|
Hot-Plug, Plug & Play, *no need install drivers | ||
|
|
Built-in Two 3" Cooling Fan | ||
|
|
Built-in 110-230V (200W) Power Supply | ||
|
|
Save Money, Easy installation,
No need setup ID or
Terminators 100Mbytes/sec Max. Data Transfers |
||
|
|
With IEEE1394 9p to 9p Beta Cable | ||
|
|
(SATA-RAID-SATA II Subsystem)
(Quadra 5.25" Bays SCSI Enclosure)
|
||
|
Hardware Requirements: |
|||
|
|
Desktop PC: with either a built-in IEEE1394b, USB2.0 port or eSATA PCI Host Adapter | ||
|
|
Notebook PC: with either a built-in IEEE1394b, USB2.0 port or eSATA CardBus PC Card | ||
OS Requirements: |
|||
|
|
*Supports Windows
2000/XP/2003 built-in
SBP2 drivers *Mac OS-X 10.2.5 or later Linux 2.4 Kernel or later |
||
Additional Links / Notes: |
|||
|
|
Windows 2000
User:IEEE1394 Services Pack 4 (Recommend) Download Windows 2000 SP4 |
||
|
|
Windows XP
User:IEEE1394 Services Pack (Recommend) Download Windows XP SP1 |
||
|
|
BB-FWB-PCI01 IEEE1394b 800Mbits FireWire Card | ||
|
|
|
||
|
Specifications are subject to
change without notice.
All brands and product names are trademarks of their respective
companies
All Products are made in Taiwan