|
BB-FWEIDE525Q-R1 FireWire Hardware RAID1 Enclosure |
||||
|
||||
BB-FWEIDE525Q-R1 is a FireWire (IEEE 1394)
to IDE (ATA/ATAPI) devices bay with RAID 1 controller.
BB-FWEIDE525Q-R1 is
ideally for tailgate interface applications for RAID 1 HDD and removable-media
drives such as CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM, tape drive. It allows IDE
drives (Master and Slave) to be connected to a 1394 serial bus in a
plug-and-play fashion.
BB-FWEIDE525Q-R1 allows users to easily
hot-swap IDE drive without interrupting the current operation.
BB-FWEIDE525Q-R1
provides the perfect solution for data backup and transferring of data between
computers using IDE (ATA/ATAPI) devices.
BB-FWEIDE525Q-R1 combines three key components:
1).FireWire (IEEE 1394) to IDE (ATA/ATAPI) Bridge Board
2).IDE RAID 1 Controller
3).Mechanism and Power supply
| BB-FWEIDE525Q-R1 FireWire Hardware RAID1 Enclosure Feature: | |||
 |
OXFW911(Intergrated 512kb Flash Memory) IDE to 1394 & TI TSB41LV02 Chipsets | ||
|
|
Compliant IEEE 1394 and compatible with proposal 1394A | ||
|
|
Two 6pin 1394 Connectors | ||
|
|
Fully Supports ATA33/66/100/133 Interface | ||
|
|
Hot-Swap, Plug & Play, *no need install drivers | ||
|
|
Fit 3.5" form factor
Two IDE devices
for RAID1 Function: Complies with T13's ATA/ATAPI-6 Draft Specification: Fully Supports 48-bit addressing for large hard drives (>128GB) including IEEE1394 interface Seagate 160GB, IBM 180GB, Western Digital 250GB, Maxtor 300GB HDD Supported |
||
|
|
Manual or Auto DIP selectable | ||
|
|
The Inner HDD tray and mounting frame were made by aluminum which is good for heat dissipation |
||
|
|
Key lock + power switch make hot-swappable |
||
|
|
And can connect ONE ATAPI device: CD/DVD/DVD-/+RW ROM, ZIP, Backup Tape, etc. | ||
|
|
Built-in 110-240V (200W) Power Supply | ||
|
|
Built-in Cooling FAN | ||
|
|
Save Money, Easy installation,
No need ID or
Terminator setting 43Mbyte/sec Max. Data Transfers |
||
|
|
With 6p to 6p IEEE1394 Cable | ||
|
Hardware Requirements: |
|||
|
|
Desktop PC: with either a built-in IEEE1394 port or a IEEE1394 to PCI Host Adapter | ||
|
|
Notebook PC: with either a built-in IEEE1394 port or a IEEE1394 to CardBus PC Card |
||
OS Requirements: |
|||
|
|
*Supports Windows
98SE/ME/2000/XP built-in
SBP2 drivers Mac OS 9.1, Mac OS-X 10.x or later Linux 2.4 Kernel or later |
||
Additional Links / Notes: |
|||
|
|
Windows 98SE
User:IEEE1394 Patch (300% Stable) IEEE1394 Patch |
||
|
|
Windows 2000
User:IEEE1394 Services Pack 4 (Recommend) Download Windows 2000 SP4 |
||
|
|
Windows XP
User:IEEE1394 Services Pack (Recommend) Download Windows XP SP1 |
||
|
|
BB-1394LPSA IEEE1394 FireWire Card | ||
|
|
|
||
|
|
Specifications are subject to
change without notice.
All brands and product names are trademarks of their respective
companies
All Products are made in Taiwan
