華 昇 BB-IDE-SATA01 Serial-ATA 轉 換 IDE 卡
       
   
   
   


新 舊 介 面 完 全 兼 容 方 案！

 

 
   
   
       
 

 

IDE-SATA01
Parallel ATA to Serial ATA  Host Bridge Board (1.5Gbps) featuring Marvell 88SA8040 Serial ATA Controller

IDE-SATA01 is ideally suited for tailgate interface applications for Serial ATA HDD. It allows Serial ATA drive to be connected to IDE (Parallel ATA) bus in a bridging fashion. IDE-SATA01 provides the perfect solution for legacy IDE (Parallel ATA) controller to adopt Serial ATA hard disk drive.

 

華 昇 BB-IDE-SATA01 Serial-ATA 轉 換 IDE 卡 功 能 簡 介:
bluebullet.gif (834 bytes)
  •  Parallel ATA to Serial ATA Bridge Board:
     
    • Serial ATA:
      - Compliant with Serial ATA 1.0
      - 48-bit sector addressing
    • Serial ATA Connector:
      - Signal + Power Type
    • Parallel ATA:
      - Ultra ATA/133 Parallel Interface
      - 48-bit sector addressing
            - Jumper for selecting Master and Slave
    • Parallel ATA Connector:
      - Female IDC 2X20 pin Connector
    • Transfer Rate:
      - Supports PIO and DMA modes
      - Supports bus master DMA at 1.5Gbps burst rate
    • DC Power Connector:
      - Mini 4-pin floppy type power connector
    • Physical Dimensions:
      - 4" x 1" (10.15cm x 2.54cm)
      -       Direct Connect Vertical type

硬 體 需 求:
bluebullet.gif (834 bytes) Serial ATA Interface device

系 統 需 求:
bluebullet.gif (834 bytes) Windows 98, ME, NT4, XP, 2000, 2003, Netware, Linux

連 結 及 其 他:
bluebullet.gif (834 bytes) About Serial ATA
 
 

 

    

所有產品如有變更,不作另行通知
各商標屬各公司所有